File:INSERIMENTO HOTEND STAMPANTE 3D REPRAP.jpg

From wiki3dline
Jump to: navigation, search
INSERIMENTO_HOTEND_STAMPANTE_3D_REPRAP.jpg ‎(498 × 470 pixels, file size: 118 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:16, 21 November 2018Thumbnail for version as of 17:16, 21 November 2018498 × 470 (118 KB)Assistenza3dline (talk | contribs)
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer NIKON CORPORATION
Camera model NIKON D3200
Exposure time 1/40 sec (0.025)
F Number f/5.3
ISO speed rating 2,500
Date and time of data generation 17:59, 21 November 2018
Lens focal length 46 mm
Orientation Normal
Horizontal resolution 300 dpi
Vertical resolution 300 dpi
Software used Ver.1.04
File change date and time 17:59, 21 November 2018
Y and C positioning Co-sited
Exposure Program Not defined
Exif version 2.3
Date and time of digitizing 17:59, 21 November 2018
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 4
APEX exposure bias 0
Maximum land aperture 4.8 APEX (f/5.28)
Metering mode Pattern
Light source Unknown
Flash Flash fired, strobe return light detected, auto mode
Retrieved from "https://www.costruiscilatuastampante3d.com/index.php?title=File:INSERIMENTO_HOTEND_STAMPANTE_3D_REPRAP.jpg&oldid=419"