Difference between revisions of "File:Struttura in profilati basamento 3dielle alluminio meccanica stampante 3d.jpg"

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D3200
Exposure time	1/60 sec (0.016666666666667)
F Number	f/4.5
ISO speed rating	2,200
Date and time of data generation	22:11, 5 January 2017
Lens focal length	34 mm
Width	6,016 px
Height	4,000 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop CC 2015 (Windows)
File change date and time	19:28, 7 February 2017
Y and C positioning	Co-sited
Exposure Program	Not defined
Exif version	2.3
Date and time of digitizing	22:11, 5 January 2017
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX shutter speed	5.906891
APEX aperture	4.33985
APEX exposure bias	0
Maximum land aperture	4.3 APEX (f/4.44)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, strobe return light detected, auto mode
DateTime subseconds	50
DateTimeOriginal subseconds	50
DateTimeDigitized subseconds	50
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	51 mm
Scene capture type	Standard
Scene control	High gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS tag version	2.3.0.0
Serial number of camera	7525468
Lens used	18.0-55.0 mm f/3.5-5.6
Date metadata was last modified	20:28, 7 February 2017
Unique ID of original document	6B0459CB6A70BD079D1223C23E97058A
IIM version	15