Difference between revisions of "File:Come costruire una stampante 3d struttura in profilati meccanica wiki 3dielle.jpg"

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D3200
Exposure time	1/60 sec (0.016666666666667)
F Number	f/8
ISO speed rating	100
Date and time of data generation	14:02, 5 January 2017
Lens focal length	28 mm
Width	6,016 px
Height	4,000 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop CC 2015 (Windows)
File change date and time	20:53, 23 January 2017
Y and C positioning	Co-sited
Exposure Program	Not defined
Exif version	2.3
Date and time of digitizing	14:02, 5 January 2017
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX shutter speed	5.906891
APEX aperture	6
APEX exposure bias	0
Maximum land aperture	4 APEX (f/4)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, strobe return light detected, auto mode
DateTime subseconds	70
DateTimeOriginal subseconds	70
DateTimeDigitized subseconds	70
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	42 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS tag version	2.3.0.0
Serial number of camera	7525468
Lens used	18.0-55.0 mm f/3.5-5.6
Date metadata was last modified	21:53, 23 January 2017
Unique ID of original document	750A2DDABE62031118B1D4F5150ACCC0
IIM version	60,443