File:Schermo lcd 2004 stampante 3d configurazione 3dprinter.jpg

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D3200
Exposure time	1/25 sec (0.04)
F Number	f/4.2
ISO speed rating	3,200
Date and time of data generation	17:47, 12 December 2016
Lens focal length	30 mm
Width	6,016 px
Height	4,000 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Adobe Photoshop CC 2015 (Windows)
File change date and time	10:09, 8 February 2017
Y and C positioning	Co-sited
Exposure Program	Not defined
Exif version	2.3
Date and time of digitizing	17:47, 12 December 2016
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX shutter speed	4.643856
APEX aperture	4.140779
APEX exposure bias	0
Maximum land aperture	4.1 APEX (f/4.14)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
DateTime subseconds	50
DateTimeOriginal subseconds	50
DateTimeDigitized subseconds	50
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	45 mm
Scene capture type	Standard
Scene control	High gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS tag version	2.3.0.0
Serial number of camera	7525468
Lens used	18.0-55.0 mm f/3.5-5.6
Date metadata was last modified	11:09, 8 February 2017
Unique ID of original document	C49013CF61B14725B06B393A65F98304
IIM version	65,266