File:Supporti albero 12 mm 3dielle costruzione asse x stampante 3d.jpg

From wiki3dline
Revision as of 10:31, 26 April 2017 by Assistenza3dline (talk | contribs) (montaggio reprap istruzioni 3dielle assemblaggio prusa 3dprinter kit 3d printer istruzioni kit reprap)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Supporti_albero_12_mm_3dielle_costruzione_asse_x_stampante_3d.jpg ‎(800 × 532 pixels, file size: 34 KB, MIME type: image/jpeg)

montaggio reprap istruzioni 3dielle assemblaggio prusa 3dprinter kit 3d printer istruzioni kit reprap

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current10:31, 26 April 2017Thumbnail for version as of 10:31, 26 April 2017800 × 532 (34 KB)Assistenza3dline (talk | contribs)montaggio reprap istruzioni 3dielle assemblaggio prusa 3dprinter kit 3d printer istruzioni kit reprap
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer NIKON CORPORATION
Camera model NIKON D3200
Exposure time 1/60 sec (0.016666666666667)
F Number f/4.8
ISO speed rating 900
Date and time of data generation 20:09, 5 January 2017
Lens focal length 38 mm
Width 6,016 px
Height 4,000 px
Bits per component
  • 8
  • 8
  • 8
Pixel composition RGB
Orientation Normal
Number of components 3
Horizontal resolution 300 dpi
Vertical resolution 300 dpi
Software used Adobe Photoshop CC 2015 (Windows)
File change date and time 17:45, 23 January 2017
Y and C positioning Co-sited
Exposure Program Not defined
Exif version 2.3
Date and time of digitizing 20:09, 5 January 2017
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 4
APEX shutter speed 5.906891
APEX aperture 4.526069
APEX exposure bias 0
Maximum land aperture 4.5 APEX (f/4.76)
Metering mode Pattern
Light source Unknown
Flash Flash fired, strobe return light detected, auto mode
DateTime subseconds 00
DateTimeOriginal subseconds 00
DateTimeDigitized subseconds 00
Supported Flashpix version 0,100
Color space sRGB
Sensing method One-chip color area sensor
File source Digital still camera
Scene type A directly photographed image
Custom image processing Normal process
Exposure mode Auto exposure
White balance Auto white balance
Digital zoom ratio 1
Focal length in 35 mm film 57 mm
Scene capture type Standard
Scene control High gain up
Contrast Normal
Saturation Normal
Sharpness Normal
Subject distance range Unknown
GPS tag version 2.3.0.0
Serial number of camera 7525468
Lens used 18.0-55.0 mm f/3.5-5.6
Date metadata was last modified 18:45, 23 January 2017
Unique ID of original document 88542174C5F5C8955787AF65127991A9
IIM version 60,443
Retrieved from "https://www.costruiscilatuastampante3d.com/index.php?title=File:Supporti_albero_12_mm_3dielle_costruzione_asse_x_stampante_3d.jpg&oldid=141"